Ridge Vent
Vent profile in either aluzinc or stainless steel with an insect screen in stainless steel. 50 mm of bitumen primer is applied near the edges to provide optimal adherence with bitumen membrane.
Available for corrosion category C3 and C5. Corrosion category C5 is present in costal areas with high salt content in the air and in other corrosive environments.
Vent opening is 110 cm2/m.
APPLICATIONS
Installed at the roof ridge for ventilation of roof constructions. It is fastened with nails or screws and covered with bitumen membrane.
The Ridge Vent is delivered flat and is bent during installation to fit the ridge.
JUAL recommends ridge vents for corrosion categori C5 for costal areas with high salt content in the air or for other corrosive environments.
Installed at the roof ridge for ventilation of roof constructions. It is fastened with nails or screws and covered with bitumen membrane.
The Ridge Vent is delivered flat and is bent during installation to fit the ridge.
JUAL recommends ridge vents for corrosion categori C5 for costal areas with high salt content in the air or for other corrosive environments.
MATERIALS
Corrosion category C3
Profile: Steel covered with aluzing, 0,6 mm.
Insect screen: Stainless steel
Ventilation strip: Black painted aluminum
Corrosion category C5
Profile: Stainless Steel AISI 316, 0,6 mm.
Insect screen: Stainless steel
Ventilation strip: Stainless steel, blank.
Duct tape inside the profile for flame stop.
Corrosion category C3
Profile: Steel covered with aluzing, 0,6 mm.
Insect screen: Stainless steel
Ventilation strip: Black painted aluminum
Corrosion category C5
Profile: Stainless Steel AISI 316, 0,6 mm.
Insect screen: Stainless steel
Ventilation strip: Stainless steel, blank.
Duct tape inside the profile for flame stop.
